• An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow
  • An Image Slideshow

Traditional parquet

„Versailles” parquet - The classic and beautiful Versailles design of a palace flooring. It can be found in royal palaces and castles of Europe. The Versailles parquet decorated interiors of numerous ballrooms and banquet halls. Today, it has come back in style because of the beauty of its simple and elegant form. Our “Versailles” parquet:
  • - is hand-made,
  • - has a tongue and groove joint and the parquet is not glued, but connected using a wooden pin.

"Versailles" parquet "Versailles" parquet
"Versailles" parquet "Versailles" parquet
"Versailles" parquet "Versailles" parquet

„Pointe de Hongrie” parquet - Although the design is classic, the unique cutting of the plank at a 45 degree angle results in an extraordinary and beautiful floor pattern. The flooring matches every interior design. You can also change the size of the planks and alignment angle. The bigger the size of the planks, the better the look of the floor in a modern interior finishing.

"Pointe de Hongrie" parquet "Pointe de Hongrie" parquet
"Pointe de Hongrie" parquet "Pointe de Hongrie" parquet
"Pointe de Hongrie" parquet "Pointe de Hongrie" parquet

 


 


  • Finishing

    Brushing, oil (natural or coloured)

    Slammed sides

    Slammed surface

    Smoked in whole

    Beveling (longitudinal and crosswise)

  • Dimensions

    Width(mm): 80, 95, 110;

    Width Length (mm): 2500 x 400; 2700 x 600;

  • Characteristics

    PRIME CLASS : varied growth ring patterns (plain, rift and quarter sawn rings), relatively homogeneous colour, without any discolorations, small healthy knots of max. diameter of 1,5mm are allowed. Internal and external sapwood reaching the top surface is not allowed, root growth rings, cracks or manufacturing defects are not allowed.

    PRIME BIS : varied growth ring patterns (plain, rift and quarter sawn rings), small healthy knots of max. Ø 10 mm of wood colour and 8 mm dark knots are allowed. Small defects in the structure, overlapping growth rings, growth discoloration and root growth rings are allowed. External sapwood reaching the top surface, cracking and manufacturing defects are not allowed.

    PRIME / PRIME BIS CLASS: Prime and Prime Bis classes combined together.

    RUSTIQUE A CLASS: varied growth ring patterns (plain, rift and quarter sawn rings), max. 30 mm healthy knots and 25 mm dark knots, knot clusters, the so called „cat paws”, small discoloration, growth discoloration, overlapping rings, as well as root growth rings, small structure defects and incidental internal sapwood are allowed. External sapwood penetrating the top surface, cracking or manufacturing defects are not allowed.

    RUSTIQUE B CLASS: varied growth ring patterns (plain, rift and quarter sawn rings), root growth rings, overlapping fibers, knot clusters, healthy and bright knots up to 50 mm, dark knots up to 40 mm, internal and external sapwood are allowed. Discolorations, heartwood, cracking, structural defects and slight manufacturing defects are also allowed.